The Automotive Junction Everything For The Automotive Enthusiast

Automotive Engineers Society

SCIENTIFIC-TECHNOLOGICAL REVOLUTION: A MEANS OF ENHANCED PRODUCTIVITY IN HUMAN SOCIETY

INTRODUCTION

Science and technology are important tools in man’s attempts to exist, develop and take charge of his environment. Ever since the discovery of science and its application man has consistently made efforts to develop various technologies in order to conquer nature, recreate the world for his simplicity and benefits. Right from the primitive times, man invented bow and arrow, fire, hoes, knives, cutlass and so on, in order to deal with the existential problems nature possesses. Even in the present world, the efforts of man are in totality geared towards the provision of food, clothing and shelter and other basic amenities for his survival.

 

Essentially, man is able to maneuver his way around the cosmos and come up with scientific discoveries because of his natural endowments. Man is naturally endowed with intelligence. He has the mental and natural ability to forge ideas and the capacity to invent. The capacity to invent makes him a creator or an inventor. Thus, the application of science to everyday life manifests in the various inventions of man vis-à-vis the technological developments in human society. Science and technology, therefore, are artificial inventions of man basically put to use for his benefits.

 

MAN, HISTORY OF SCIENCE AND TECHNOLOGY.

It is pertinent to mention that science does not exist outside the social cultural environment of man. Man is the creator of science and the inventor of technology. In fact, man could be regarded as the highest expression of his environment. The development of science and technology is usually aimed at finding solutions to certain existential problems or difficulties of nature within a particular socio–cultural environment. Although the nature of science suggests an objective application to universal problems and conditions, which is a deductionist approach to science; we cannot, however, deny the fact that it is at first targeted at dealing with particularistic instances within a given environment.

 

Historically, man has played a key role in the development of science and technology. The human society, no doubt, has gone through a series of evolutions, transformations and as well as revolutions at every stage of its development. In the early Greek period, for instance, philosophy, art and science attracted most wide spread attention. Science and art were part of philosophy. What existed however was speculative science. This was the period where Thales lived. He regarded as the first notable philosopher and scientist in the western world. He was the first person to predict an eclipse of the sun, which eventually took place in 585 B.C. His pupil, Anaximander, was the first evolutionist scientist in the western world. He held that all living things originated from the sea and began to develop in the course of time into various forms by means of adaptation to their environment. He held that man evolved from the animals. Anaximander also held that the earth was not flat but like a cylinder in shape and is known to have made the first map in history. Pythagoras the mathematician, Democritus the atomists and Aristotle the greatest scientist in Ancient Greece, all lived at this period.(Omoregbe 2002, 177)

 

Religion and theology took the centre stage and became the focus of interest in the middle ages. Ethics, literature and art characterized the renaissance age. However, at the emergence of Francis Bacon who laid the foundation for inductive model of science, the modern period witnessed the development of empirical and experimental science. This was the period where two notable doctrines emerged namely, the Rene Descartes led Rationalism and the John Locke led Empiricism. But in the contemporary period the centre of interest has progressively shifted to science and technology. (Fadaunsi 1997, 58).

 

It is fundamental to mention that the internal factors and as well as man’s non complacency and his quest for knowledge in each of the periods in the history of society informed the shifts in the emphasis for development.

 

Technology is what we know as applied science. It is the “systematic study of techniques for making and doing things” (Gordon 1942, 20). In a like mind manner, D.P Lauda and R.D Ryan (1971: 53) see technology as:

Man’s effort to cope with his physical environment both that provided by nature and t9hat created by man’s own technological deeds, such as cities and his attempts to subdue or control that environment by means of his imagination and ingenuity in the use of available resources.

 

Technology is the application of the discoveries of science to improve the conditions of human life. It is this application that results in inventions to improve human welfare in various sectors of human life. Disciplines like Engineering, Medicine, Information Technology, Electronics, Architecture, etc. are applied sciences.(Omoregbe 2002, 179).

 

The history of technology extends as far as the ancestors of man. Technology grows and develops hand in hand with science. Both of them compliment each other. The development of various tools when man was at the primitive stage in the history of society is recorded to be the first technological revolution. By the time of the Neanderthal Man, a degree of specialization in tool making had been achieved. The Cro–Magnon homosapiens mastered some mechanical principles in pottery making and by the period of the Neolithic Man, man had fairly advanced in tool making crafts.(Ndubuisi 2002, 132).

 

By the 16th century, Francis Bacon advocated experimental science and suggested that scientists should study the methods of craftsmen. Technology continued to grow with development of iron bridges, steam engines and textile machinery. This period witnessed the complimentary roles of science with technology. For instance, Edison, the inventor of the first practical lighting used the scientific ideas of Faraday and Henry, who had earlier experimented on electricity. Bell, the inventor of the telephone also developed it on the scientific ideas of Helmholtz.(Ndubuisi 2002, 133).

 

ENHANCED PRODUCTIVITY

There is no gainsaying the fact that the revolution that takes place in science and technology in human society is by no mean feat. With the aid of technology, man has been able to put to use his ideas of almost a perfect, seamless society with the aid of various gadgets he develops for his benefits. The world today, particularly in this 21st century, experiences economic and political growths as a result of scientific and technological advancements. There are advancements and breakthroughs in the areas of power and energy, transportation, communication, medicine, architecture, agriculture, industry, military technology, computer, space shuttles, biotechnology etc.

 

That advancement in science and technology has contributed to the enhancement of productivity and increased economic growth in human society is an understatement. The fact is evident that science and technology has a large interaction to productions in all sphere of human society. The industrial revolution which occurred in Europe in the 18th century marked the beginning of an economic growth and revolution. This industrial revolution showed a massive social, economic, and technological change, which commenced with the introduction of steam power, fuelled primarily by coal. The technological and economic progresses recorded of the industrial revolution gained momentum with the introduction of steam powered ships, boats and railways. However, at the turn of the 19th century, the revolution spread throughout Western Europe and North America, and eventually impacting the rest of the world. (Wikipedia)

 

The events following the enhanced productivity of labour characterized by the industrial revolution which had spread across the world led to the ‘second industrial revolution’ beginning around 1870. This second industrial revolution gradually grew to include “the chemical industries, petroleum refining and distribution, electrical industries and the automotive industries”.(Ndubuisi 2002, 151). In fact, the increasing availability of economic petroleum products also reduced the usage of coal to the potential for industrialization.

 

It is therefore important to mention that these industrial revolutions, which led to the formation of various giant industrial corporations with often nearly, globalize international operations and interests, paved the way for the successive scientific technological revolution that emerged in the 1940s and 1950s. This scientific and technological revolution is thus evident in some countries, like the disintegrated Soviet Union and the United States of America, visit to the moon during this period. Today, other countries are following suite. In September 2008, China launched her space shuttle and sent a 3 man one week space delegation to the moon.

 

It can be seen from the foregoing that the indelible mark made by the revolutions in science and technology has influenced the way man, of the modern age, perceives the world. The scientific and technological revolution that has taken the world by storm today stemmed from the industrial revolution of the 18th century. Kolawole Ogundowole (2003: 134) notes that:

In the first half of the twentieth century especially during the 194s and 195s there were fundamental shifts in the structure of most sciences and in the scientific activity as a result of major scientific and technical discoveries. This in turn led to an increase interaction of science with technology and production. Precisely, it was during that decade that mankind entered the period of scientific and technological revolution.

 

Today, the scientific and technological revolution is enhancing productivity of labour. It is changing the entire face of social material production. It evidently has a positive change over the nature, conditions and contents of labour as well as the composition of productive forces, the social division of labour, and the sectional and occupational structure of society.

 

In his perception, Dryakhlov (1984: 55) defines scientific and technological revolution as:

The radical qualitative transformation and production forces completed as a result of the merger between the scientific and technological revolutions and the conversion of science into a direct productive force.

 

This implies that as one of the basic principles and laws of dialectics, there exists in human developmental processes, quantitative and qualitative changes. This affirms the materialist assertion that everything develops from the transformation of quantity into quality. Thus, scientific and technological revolution is a special phenomenon connected with the conversion of science into direct productive force of the society, “the radical qualitative transformation of the structure of productive forces and the changes in the character and content of human labour”. (Ogundowole 2003, 138).

 

With the evolution and development of science and technology, it has become evident that this revolution has increased production and consumption, particularly in the developed countries of the world, beyond all expectations of the past. It is thus possible that poverty, hunger, and even unemployment on a large scale would be a phase of history. This is why V.G Afanasiev (2003: 139) notes that:

Science is the generator of ideas: technology is their material, substantive embodiment; while production is the area where the functioning of technology occurs, where people use scientific and technological achievements to obtain their necessary material wealth.

 

At this juncture, it is pertinent to mention that the rate of development of science and technology and its startling achievements in almost every sphere of human life, particularly as it enhances productivity in human society, is not without its side effects. Karl Marx was one of those who pointed it the evil inherent in the industrialization process. Marx was not, however, against the development of technology. But Marx believed that the industrialization process was the evil in the dialectical progression of feudal economic modes, which led to the full development of capitalism. Marx admitted that the industrialization of the society occurred, but it only led to the polarization of society into two main classes. Marx did not deny this industrialization, but was annoyed at the exploitation that existed between the bourgeoisie and the proletariat. According to Marx (1972: 183):

Industrialization engenders the polarization of societies into two classes, the bourgeois those who own the means of production, i.e. the factories and the land, and the much larger proletarian working class who actually perform the labour necessary to extract something valuable from the means of production.

 

As a direct effect of the scientific technological revolution, Marx opined that rapid advancements in technology left many skilled workers unemployed, as one agricultural and manufacturing task after another was mechanized. Again, Marx pointed out that there were flights of millions of unemployed people from rural areas or small towns to the large cities as a result of the search for white collars jobs. Thus, there was the development of large urban population centers, which actually led to unprecedented conditions of poverty in the slums that housed workers for the new factories. At the same time, the bourgeoisie class, at only a small fraction compared to the proletariat’s size became exceedingly wealthy.

As a solution to this situation of unequal distribution of wealth and sheer exploitation of the capitalist system, Marx asserted that the dialectical progression, itself, is a necessary precursor to the development of socialism and eventually communism. Marx (1972: 209) believed that:

The industrial proletariat will eventually develop class consciousness and revolt against the bourgeoisie, leading to a more egalitarian socialist and eventually communist state where the workers themselves own the means of industrial production.

 

Marx may not be right with his belief that capitalism, which developed as a result of the industrialized technological advancements, would collapse and give way to socialism and eventual communism. The reality in our world today shows that capitalism, as against socialism, strives and technology is advancing. But events in recent time show that advancement in technology has not solved most of the existential problems in our world. Advancements in food/agricultural technology, for instance, have not halted the shortage of food. Taken that famine is prevalent in most developing countries, citizens of the technological advanced countries are also crying fowl with the high cost of food items in their society. In fact the United Nations Organizations, early in the year 2008, announced that the entire world was going through a huge food crisis.

 

In the same vein, advancements and revolution in science and technology did not stop the economic recession that occurred in the United States of America in 2008. Despite its enhancements of productivity, scientific and technological revolution did not stop this economic recession in the U.S which led to the loss of over 800 thousand jobs between January and September, 2008. The 700 billion dollars economic bail out plan sent by the erstwhile U.S president Bush and approved by the legislature in October 2008 remains to be seen in helping the economic turn around of the country. Even the stimulus plan by the current US president Obama has not made significant contribution to the US economy.

 

Similarly, the revolution in science and technology has not stopped the death of a number of little children in China over the melamine contamination of the baby milk and other diary products. Hence, despite its potentials in enhancing productivity, its effects on labour, human life, job loss, could sometime be devastating.

 

CONCLUSION

We cannot deny the good that the advancements in science and technology have done to man in virtually every aspect of his life. We cannot also rule out the fact that man is the instrument of change in the scientific technological revolution. In order words, science and technological developments cannot be made possible without man being at the centre of its creation and inventions. This makes B.M Kedrov and S. Shukhardin (2003: 139) consider that “scientific and technological revolution is an integral phenomenon encompassing the whole ‘man–science–production’ system”.

 

We must however emphasize that science and technology is like a double–edge sword. It has both positive and negative sides. While its success has tremendously improved the quality of human life, its negative side is highly devastating to human life.

 

Man faces serious danger of the destructive side of technology in the areas of air pollution, pollution of seas and rivers, the depletion of the ozone layer, toxic waste, etc. The destructive effects of technology on mankind could also be seen in the areas of the manufacture of weapons of mass destruction, in particular the manufacture of chemical weapons, atomic bombs, biological and nuclear weapons.(Omoregbe 2002, 181).

 

The history of modern world has shown that powerful countries that have developed these weapons of mass destruction are usually tempted to use it on weaker countries. The atomic weapon of mass destruction used by the United States of America, during the Second World War, over Hiroshima and Nagasaki in Japan is still fresh in our memory. This is why presumably most other countries, like Iran, Korean, India etc., are developing nuclear weapons for themselves in order to protect themselves and wade off the threat of attack.

There are various other threats that the advancements and revolution in science and technology pose to mankind, but these destructive elements of science and technology are not enough excuses to deny the obvious that almost everybody anywhere in the world has benefited positively from it. It has improved man’s condition of life by making the necessities of life, like food; shelter; clothing; transportation; communication; health; etc., more easily available.

 

It is therefore our position that the positive elements that can be derived from the science and technology are of great importance to man. Man must therefore ensure that science and technology must be to his service and oriented towards human affairs. Man must avoid the wrong usage of technology as this may lead to his self destruction. The wrong usage of science and technology poses more serious threats to world peace which man has been trying to attain since the beginning of the world.

 

 REFERENCES

Afanasiev V,G, quoted from Kolawole Ogundowole (2003), Nature of Man: 

                               History and Philosophy of Science in 10 Modules, Lagos,

                               Correct Counsels Limited.

Dryakhlov N.,(1984), The Scientific and Technological Revolution: Its Role in

                               Today’s World, Moscow, Progress Publishers.

Fadaunsi Ayo, (1997), Science and Technology as Promises and Threats to

                               Societies” in The Nigerian Journal of Philosophy,

                               Department of Philosophy, University of Lagos.

Gordon G., (1942), What Happened in History, London, Oxford University Press.

Kedrov B.M and Shukhardin S. quoted from Kolawole Ogundowole (2003), 

                             Nature of Man: History and Philosophy of Science in 10   

                             Modules, Lagos, Correct Counsels Limited.

Lauda, D.P and Ryan, R.D, (1971), Advancing Technology, Iowa, W.M.C. Brown

                              Company Pub,ishers.

Marx Karl, (1972), Economic, Class and Social Revolution, London, Nelson

                              Publishers.

Ndubuisi Friday,(2002),  “The Rise and Development of the Various Areas of

                              Technology” in Kolawole Ogundowole (ed),  Man, History

                              and Philosophy of Science: A Compendium of Readings,

                               Lagos, Obaroh and Ogbinaka Publihers Limited.

Omoregbe Joseph, (2002),  “Science and Technology in the Service of Man” in

                               Kolawole Ogundowole (ed),  Man, Historyn and

                               Philosophy of Science: A Compendium of Readings,

                               Lagos, Obaroh and Ogbinaka Publihers Limited.

Wikipedia, “Industrial Revolution”, http.www.thefreeencyclopedia.htp

 

 

About the Author

UMBC SAE Baja Wisconsin 2009

Supertech® Is a Solid Immersion Device Which Functions Inside the Fuel Tank of Vehicles with Hydrocarbon-driven Engines (Petrol or Diesel). $99.99 Supertech® is a solid immersion device which functions inside the fuel tank of vehicles with hydrocarbon-driven engines (petrol or diesel). There are five models of different size, providing a capability range for fuel tank capacity of up to 800 litres. Model A is the smallest with capability up to 40 litres fuel tank capacity. Model E is the largest with capability up to 800 litres fuel tank cap...

Buffalo Tools HKW8 S.A.E. 8-Piece Hex Key Wrench Set $5.58 Tired of losing that free hex key every time you buy your new furniture? Get this set and don't worry about that anymore because this set gives you everything you need. The superior quality provides maximum torque and prevents rounding out of the key or hex socket. Included are all of the popular SAE sizes: 1/16", 5/64", 3/32", 1/8" 5/32", 3/16", 7/32", and 1/4". Included is a storage ring to keep...

Jumper Cables 12' 10 GA TRP BOOSTER CABLE BLK/RD $17.99 "ACDelco" BOOSTER CABLE Cable jackets are made of TPE compound which provides superior flexibility and a longer life All cables meet SAE (Society of Automotive Engineers) requirements and contain 100% copper conductors Standard Jaw Sleeved....

Chief CMA012018 12inch - 18inch Black Adjustable Projector Extension Column $99.00 12" - 18" Adjustable Extension ColumnMODEL - CMA-012018 VENDOR - Chief Mfg. FEATURES - 12" - 18" Adjustable Extension Column CMA Adjustable Extension Columns can be used with any 1 1/2" NPT accessory to lower projector to desired height. Provides 2' range of height adjustment in 1" increments depending on model (3' to 12' lengths). Includes set screw for a...

Introduction to Internal Combustion Engines $49.99 The most comprehensive, truly introductory text on internal combustion engines. A valuable reference for students studying the internal combustion engine and for engineers needing a practical overview of the subject, this third edition includes new material covering fuel chemistry, additive performance and variable geometry turbocharging. Chapters cover: Thermodynamic principles Combustion and fue...

Fundamentals of Vehicle Dynamics (R114) $49.99 The first book providing comprehensive coverage of vehicle dynamics in a single volume, Fundamentals of Vehicle Dynamics provides a foundation of engineering principles and analytical methods to explain the performance of an automotive vehicle, with chapters focusing on: acceleration performance; braking performance; aerodynamics and rolling resistance; ride; tires; steady-state cornering; s...

Race Car Vehicle Dynamics (R146) $95.95 Includes Race Car Vehicle Dynamics Program Suite on CD-ROM, a valuable learning tool and brand new addition to the RCVD series! Written for the engineer as well as the race car enthusiast, Race Car Vehicle Dynamics (the original classic) gives a comprehensive treatment of vehicle dynamics and its application in a racing environment. RCVD, now in its sixth printing, is also widely used as a college...

---

Society of Engineers UK $70.1 High Quality Content by WIKIPEDIA articles The Society of Engineers was a learned society that was integrated with the Institution of Incorporated Engineers (IIE) in 2005, with both societies later being incorporated into the Institution of Engineering and Technology.Established in May 1854 in The Strand, London, The Society of Engineers was the third oldest professional engineering body in the UK. It promoted the interests of members worldwide and was concerned with all branches of engineering. It was founded as a means of reunion for former students of Putney College one of few institutions giving technical and scientific training for engineers at that time. Author: Surhone, Lambert M./ Timpledon, Miriam T./ Marseken, Susan F. Binding Type: Paperback Number of Pages: 96 Publication Date: 2010/08/12 Language: English Dimensions: 6.00 x 9.02 x 0.23 inches

Society of Manufacturing Engineers $58.94 High Quality Content by WIKIPEDIA articles Founded in 1932 with 33 members, the organization was originally named The Society of Tool Engineers (STE). A year later, it was renamed the American Society of Tool Engineers (ASTE). It finally became the Society of Manufacturing Engineers in 1969.SME offers several industry standard certifications for professional recognition, and documentation of a members manufacturingrelated knowledge and skills. These include the Certified Manufacturing Technologist (CMfgT), Certified Manufacturing Engineer (CMfgE), Certified Engineering Manager (CEM) and Certified Enterprise Integrator (CEI). Author: Surhone, Lambert M./ Tennoe, Mariam T./ Henssonow, Susan F. Binding Type: Paperback Number of Pages: 72 Publication Date: 2010/08/15 Language: English Dimensions: 6.00 x 9.02 x 0.17 inches

Society of Environmental Engineers $60.54 High Quality Content by WIKIPEDIA articles The Society of Environmental Engineers (SEE) is a British professional engineering institution founded in 1959. It is licenced by the Engineering Council UK to assess candidates for inclusion on ECUKs Register of Professional Engineers and Technicians. The Society publishes the quarterly journal Environmental Engineering, as well as a regular newsletter. Its address is The Manor House, High Street, Buntingford, Herts, SG9 9PL, United Kingdom. Author: Surhone, Lambert M./ Timpledon, Miriam T./ Marseken, Susan F. Binding Type: Paperback Number of Pages: 72 Publication Date: 2010/08/12 Language: English Dimensions: 6.00 x 9.02 x 0.17 inches

Transactions of the American Society of Civil Engineers By American Society of Civil Engineers (COR) $610.18 Author: American Society of Civil Engineers (COR) Series Title: TRANSACTIONS OF THE AMERICAN SOCIETY OF CIVIL ENGINEERS Subtitle: 2009 Publication Date: 2010/05/12 Number of Pages: 1201 Binding Type: Hardcover Language: English Depth: 2.50 Width: 6.00 Height: 8.75

Society of Professional Engineers UK $70.1 High Quality Content by WIKIPEDIA articles In the United Kingdom, the Society of Professional Engineers is a private limited company incorporated on November 14th, 1969.The Society traces its origins to the Society of Engineers, itself founded in 1854.The Societys legal objects are: To promote the high standards of expertise and professionalism in the practise of engineering, for the benefit of those members of the general public who have need to avail themselves of the services of engineers.To promote the development of inventions and improvements in the practise of engineering and to disseminate information on matters affecting the practise of engineering so as to bring the results of research and considerations of good practise into the public domain.To promote improvements in the laws relating to matters of engineering practise so that members of the public may be better able to rely on the highest standards of advice and practise in those who purport to be professional engineers Author: Surhone, Lambert M./ Tennoe, Mariam T./ Henssonow, Susan F. Binding Type: Paperback Number of Pages: 92 Publication Date: 2010/08/17 Language: English Dimensions: 6.00 x 9.02 x 0.22 inches

Society of Women Engineers $79.66 High Quality Content by WIKIPEDIA articles The Society of Women Engineers (SWE), founded in 1950, is a notforprofit educational and service organization. SWE is the driving force that establishes engineering as a highly desirable career aspiration for women. SWE empowers women to succeed and advance in those aspirations and be recognized for their lifechanging contributions and achievements as engineers and leaders. SWE has over 17,000 members in nearly 100 professional sections and 300 student sections throughout the United States of America. Author: Surhone, Lambert M./ Tennoe, Mariam T./ Henssonow, Susan F. Binding Type: Paperback Number of Pages: 104 Publication Date: 2010/08/15 Language: English Dimensions: 6.00 x 9.02 x 0.25 inches

Society of Tribologists and Lubrication Engineers $70.1 High Quality Content by WIKIPEDIA articles The Society of Tribologists and Lubrication Engineers or STLE is the premier technical society that serves the needs of more than 10,000 individuals and 150 companies and organizations that comprise the tribology and lubrication engineering business sector, bringing together managers, engineers, scientists, technicians, academics, and government institutions from around the world to learn and share the best practices for the tribology and lubrication fields. This professional organizations stated mission is to advance the science of tribology and the practice of lubrication engineering in order to foster innovation, improve the performance of equipment and products, conserve resources and protect the environment. Its stated vision is to be a leader in the global network of individuals, institutions, societies and corporate entities with a common interest in advancing the science of tribology and the practice of lubrication engineering. Author: Surhone, Lambert M./ Tennoe, Mariam T./ Henssonow, Susan F. Binding Type: Paperback Number of Pages: 88 Publication Date: 2010/08/16 Language: English Dimensions: 6.00 x 9.02 x 0.21 inches

Society of Electrical and Electronics Engineers $70.1 High Quality Content by WIKIPEDIA articles Society of Electrical and Electronics Engineers (SEEE), College Of Engineering, Guindy, Anna University, Chennai600025 SEEE offers higher education in Electrical Engineering, Technology and allied Sciences relevant to the current and projected needs of the society. Besides promoting research and disseminating knowledge gained therefrom, it fosters cooperation between the academic and industrial communities. SEEE offers space for engineering students to showcase their talent in the field of electrical and electronics by conducting annual technical symposium (WAVES). Author: Surhone, Lambert M./ Tennoe, Mariam T./ Henssonow, Susan F. Binding Type: Paperback Number of Pages: 80 Publication Date: 2010/08/13 Language: English Dimensions: 6.00 x 9.02 x 0.19 inches

---